Control set
Home / Products / Tools / Demolition hammer
If you need to buy direct and wholesale, you can make your purchase by calling the numbers of the company and get the price list.
ModelMaximum powerMaximum pressureحداکثر جریان
PC102 HP 10 Bar 10 A
Description
The control set is one of the practical equipments in the pump and water supply system industry. In short, the function of the control set is to automate, control and regulate the water pressure. In fact, the control set is used as one of the accessories of the pumps in different water supply networks and is used with the purpose of controlling the water flow of the pumps and preventing the interruption and connection of the flow and other damages caused to the pump and even the piping of the buildings during fluctuations. .
ModelMaximum powerMaximum pressureMaximum current
PC122 HP 10 Bar 10 A
Control set applications
As mentioned, the control set has the task of regulating the water pressure, so that it can completely control and regulate the increase and decrease of the water pressure. The importance of using this device is because excessive water pressure damages the pump and increases its maintenance costs. On the other hand, the pipes in the building that carry water are not safe from these damages. Therefore, the main use of the control set is in home pumps, and this is because the inlet pressure is higher in cities. Therefore, this device cannot be used in places where the water entering the pump has no pressure. For example, in tanks, wells and pools where the water is stagnant, the control set is not used and its use is not recommended.
Contact : 02632188
Control set
Home / Products / Tools / Demolition hammer
If you need to buy direct and wholesale, you can make your purchase by calling the numbers of the company and get the price list.
تماس : 02632188
ModelMaximum powerMaximum pressureMaximum current
PC132 HP 10 Bar 10 A
​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​ And it is pumped. The control set can be connected to any centrifugal pump with a motor power of 1.5 HP and a power of 1.1 kW. In general, the purpose of building a five-way automatic mechanical pressure source removal control set has been. When the water pressure inside the pipe drops below a certain value, the control set starts the pump, and when the flow inside the pipe drops below about 2 liters per minute, it stops the pump after a few seconds.
ModelMaximum powerMaximum pressureMaximum current
PC152 HP 10 Bar 10 A